ATLANTES PARTS
|
|
ATC12 Control Board A5 Series
12v |
$165.75 |
|
|
ATMR12 Atlantes
""""A"""" Series 12v DC Control Board Assembly For model's that use metalic flush lever (on the side of bowl). Note: securing nut is reverse thread |
$175.25 |
|
"No Picture" |
AHRK Atlantes Overhaul Kit |
$85.85 |
|
|
C254 Joker Valve Black ""cross"" type. Discharge surge supressing check valve. For all model Atlantes A and A5 series |
$16.55 |
 |
Solenoid Continuous Duty AM06012 Solenoid Continuous Duty Dichromate Dip/Zinc End |
$28.99 |
 |
Atlantes Discharge Impeller AM120W Atlantes Discharge Impeller Assembly |
$29.99 |
 |
| Atlantes Water Saver Lever AM503W Atlantes Water Saver Lever Assembly, White |
$14.99 |
|
|
Crown Head and Crown Head II
 |
G13W Intake Pump
Impeller (Crown head only) Impeller with (1)CH7,(1)CH7A,(2) G15 teflon washers. For all Crown head series with built-in inlet pump and Crown head II earlier models. Note: Not for newer Crown head II. (see AM220AW in Atlantes section)" |
$24.98 |
 |
C253 Joker Valve Discharge surge supressing check valve. Red ""I"" type opening. For Crown head and Crown head II. Note: Older Crown head ""standard"" (weighted flapper type) do not use this piece, contact customer service |
$15.95 |
 |
Crown Head Deep Draft Repair Kit $105.00 CDRK Crown Head Deep Draft Repair Kit. Repair kit includes: 1234, 161107, C253, CH119MW, CH11, CH120, CH121, CH12, CH37E, CH44, CH57, CH59, CH7A, CH8, CH92, F149VT, G13W, G15, G4, M13, RNI and SL1CC. |
$88.95 |
 |
Crown Head Repair Kit $96.00 CHRK Crown Head Standard Repair Kit. Repair Kit includes: 1234, 161107, CH117W, CH11, CH12, CH37E, CH57, CH59, CH7A, CH8, CH91, G13W, G15, G4, M13, RNI and SL1CC. |
$81.99 |
 |
Crown Head CD Series Repair Kit $99.25 CSRK Crown Head, CD Series Repair Kit. Repair Kit includes: 1203B, 1234, 161107, 31-102, C253, CH120, CH12, CH37E, CH57, CH59, CH7, CH8, CH92, G13W, G15, RNI and SL1CC. |
$83.95 |
 |
Compact II Repair Kit $64.00 CPRKII Compact II Repair Kit. Repair Kit includes: 1214B, 1226C, 1228CW, 1234, 1316MS, 1350W, 1353, 1356, 1357, C253, RNI and SL1CC. |
$54.88 |
 |
CH7 Crown Head
Inlet Pump Cover Gasket For all Crown head and earlier Crown head II that use G13W impeller |
$7.75 |
 |
CH120 Discharge
Pump Wall (black) For use in Crown head ""Centrifugal discharge"" series and Crown II. Note: Not used in any models earlier than May 1988 |
$21.99 |
 |
CR1 Centrifugal
Discharge Pump Kit Centrifugal discharge pump kit includes part CH119M discharge pump w/set screws, CH121 macerator and CH120 pump wall |
$43.45 |
 |
CH102MW Intake
Pump Assembly Complete For use in Crown head centrifugal series and earlier model Crown head II. |
$146.95 |
 |
CH18W Front Cover
w/Gasket Crown head and Crown head II front cover with ""O"" ring gasket. For all model Crown head and Crown head II |
$31.95 |
 |
Crown
Head (exchange lower base assembly) Exchange Program: Remanufactured pump and motor units, are sold with a new product warranty, taking the customer's older unit in trade*. These units are shipped to you and a core charge of an additional $125.00 is assessed until the older unit is received back , whereupon the core charge is returned to you, or a credit is issued to your credit card company (depending upon method of original payment). * Core must be rebuildable to get credit |
$585.00 |
 |
1222AW Discharge Elbow and Flange |
$14.99 |
 |
1222B Straight Discharge Assembly |
$21.99 |
PHII and PHEII
|
|
PHII and PHEII Repair kit with
U-cup piston seal (PHRKII)"This kit offers the most commonly
needed components for rebuilding your PHII or PHEII head (older series no
1214* series parts included.) PHRKII OVERHAUL KIT CONTENTS:(2) 1201 Inlet &
Outlet Valve Ball. (2) 1202 Inlet & Outlet Valve Cap Gasket. (1) 1203B1
Inlet Valve Stem ""O"" Ring. (1) 1203B2 Inlet Valve Body ""O"" Ring. (1)
1203B3 Inlet Valve Bottom ""O"" Ring. (1) 1213A ""U"" Cup. (1) 1213B Delrin
Washer. (1) 1213C Snap Ring. (1) 1213D White Rubber Washer. (4) 1226C
Housing Spacer Washer. 1 1228CW Flapper Valve Assembly. (1) 1232MS Piston
multiseal ""O"" Ring. (1) 1234 Bowl Gasket white rubber. (1) C253 Joker
Valve. (4) RNI Nylon Shoulder Washer."
|
$51.99
|
 |
PHII and PHEII
Repair kit with cartridge piston seal (PHRKIIC) "This kit offers the most commonly needed components for rebuilding your PHII or PHEII head current model (includes 1214 style seal assembly) PHRKIIC OVERHAUL KIT CONTENTS:(2) 1201 Inlet & Outlet Valve Ball. (1)1214B ""O"" Ring. (2) 1202 Inlet & Outlet Valve Cap Gasket. (4) 1226C Housing Spacer Washer.(1)1203B1 Inlet Valve Stem ""O"" Ring. (1) 1228CW Flapper Valve Assembly. (1) 1203B2 Inlet Valve Body ""O"" Ring. (1) 1203B3 Inlet Valve Bottom ""O"" Ring. (1) 1214 Seal Cartridge. (1) 1214A Piston Shaft Seal. (1) 1232MS Piston ""O"" Ring. (1) 1234 Bowl Gasket. (1) C253 Joker Valve. (4) RNI Nylon Shoulder Washers." |
$58.95
|
 |
PHII Pump assembly
complete (PHIIPUMP) Complete pump assembly for PHII and PHEII toilets. Ready to mount on base |
$183.99 |
 |
Piston rod yoke
(1211PL) Piston rod yoke for PHII series toilets. (w/locking set screw) |
$27.99 |
 |
Piston seal
cartridge assembly (1214W) Piston seal cartridge with seal, ""O"" ring and cartridge. Note: For use with 1200CW pump housing only |
$28.55 |
 |
Piston rod
assembly (1212W) Piston rod with ""O"" ring for PHII series toilets |
$59.99 |
 |
PHII Piston rod
"O" ring (1232MS) Piston rod ""O"" ring. ""Multi-seal |
$12.95 |
 |
PHII Air valve
(1203W) Inlet air inlet valve assembly |
$24.99 |
 |
PHII Inlet valve
body (1203BW) Inlet valve body for PHII series toilet. Contains all inlet valve ""O"" rings |
$24.99 |
|
|
Joker valve (C253) Joker valve for PHII series toilet |
$15.95 |
 |
PHII Pump housing,
new cartridge seal (1200CW) Pump housing only for PHII and PHEII model units |
$51.75 |
|
Flapper valve assembly (1228CW) | $21.99 |
|
Piston rod seal assembly (1213W) | $12.99 |
|
Connecting rod assembly (1116BW) | $21.95 |
|
PHII valve handle (1209BW) | $10.55 |
|
PHII base assembly (1248W) | $64.99 |
