MODEL 1000

Up MODEL1000 PARTS

The Model 1000 - Great Tasting, Safe and Germ Free Water
      3 Stage System For Boats, RVs & Home 
 

                          
                              drop.jpg (5019 bytes)THE MODEL 1000
    
This model WaterFixer uses a 3 stage system that delivers water at 4 gallons per minute.
    
STAGE 1 - A five micron (5.0) prefilter removes particles larger than 1/5000 of an inch in size.
  
STAGE 2 - A half micron (0.5) filter removes fine sediment, odors, unpleasant tastes, chlorine and other chemicals, plus Cryptosporidium and Giardia cysts.
   
STAGE 3 - A Stainless Steel Ultra-violet Light Exposure Chamber destroys bacteria, viruses, protozoa, yeast, mold spores and algae.		 filter1000.jpg (22329 bytes)


NO WAITING...
The Model 500 WaterFixer's 1.5 gallon per minute flow rate means no waiting to fill your glass or containers.
   
NO WASTED WATER...
Reverse osmosis systems can waste as much as 4 gallons of water to flush out its system for every 1 gallon delivered. No precious water is wasted with the WaterFixer's unique design.
    
NO SEPARATE WATER TANK...
Other technologies require separate water tanks that use valuable space. WaterFixer's method of sterilizing water at a high flow rate makes a separate tank unnecessary.
 
NO DANGER FROM INFECTION...
The ultraviolet chamber kills germs which may grow on activated charcoal filters and in water tanks. Unlike other methods, the WaterFixer does not store unprotected water.
 
NO SPECIAL TOOLS...
Easy installation requires very little time and simple household tools.
     
WE CARRY ALL Filters and Replacement parts.

See our "How it Works" Page for Ultra Violet Disinfection Information, ORGANISMS DESTROYED BY ULTRAVIOLET LIGHT & Diagrams
   
IT'S AFFORDABLE!  Now you can have safe, good tasting water!

 

    

SPECIFICATIONS 
Power Source:

1000-12V      12 Volt DC
(draws 2.5 amps)

1000-120V    
120 Volt AC /  60 HZ
            
Dimensions:
Length   20"
Depth    3.5"
Height   15.5"
   
Weight: 19 lbs
   
Flow Rate: 4 GPM (US)
   
Maximum Pressure: 125 PSI
  

$549.00
 either model

$419.99
   
WF001
    120 VOLTS AC

 

    WF003
    12 VOLTS DC

 

EASY INSTALLATION
Very simple to install. For maximum effectiveness, install as close to point of use as possible. Simply break into water line and connect incoming line to prefilter 1/2" NPT opening, then connect "outflow" to other end of water line. Plug the 120V into any grounded 120V outlet or wire the 12V to your 12V power circuit.